Welcome to LET'S CLEAN Online Store - Sydney Paint Strippers!

My Cart:

0 item(s) - $0.00
You have no items in your shopping cart.

BLUE BEAR 600GL COATINGS REMOVER (SOY-GEL) - 5 GALLON/ 18.9 Ltrs

Quick Overview

Want a better way to remove paints, urethanes, acrylics, epoxies, and enamels without the back-breaking work of sanding and chiseling?

Made with 100% American Grown Soybeans, 600GL Coatings Removerdoes all that and more. 
Throw out the sand paper and put away the knee pads. Just put some 600GLon the coating to be removed, allowing you to work on another project. 
Let 600GL Coatings Remover do the work, not you! 
Within minutes you can see the power of 600GL start to lift the coatings, all while you spend time on other tasks. 
Not sure how many coats need to be removed? 600GL Coatings Remover doesn't care. One coat, five coats, twenty coats, 600GL will remove them all and leave you smiling.
In addition, 600GL Coatings Remover goes a long way, with one gallon giving you up to 200 sq. ft. coverage. That's THREE times the coverage of most traditional strippers!! With 600GL, you won't have to deal with harsh odors that we all know so well with other strippers. No odor 600GL Coatings Remover is the perfect helper for anyone wanting to remove paints, urethanes, and enamels.



- Formerly known as SOY•Gel™ Paint and Urethane Remover
- Removes Multiple Layers In One Application
- SAFE! No Methylene Chloride
- Made with 100% American Grown Soybeans
- Gel Formula for easy application.
- GHS Compliant
- Low Odor


Trial Packs

We always recommended testing to ensure you have the right product for the job.
We supply economical trial packs for these essential tests, click here for a single sample or a Test Kit

Availability: In stock

$589.00
  • Buy 10 for $530.10 each and save 10%
  • Buy 20 for $471.20 each and save 20%
OR

Details

Let's Clean's most-asked-for product, 600GL (SOY·Gel™), continues to impress contractors with it's ease of use and powerful removal properties. With three times the coverage rate of traditional petroleum removers, 600GL (SOY·Gel™) effectively removes multiple layers of topical sealers, acrylics, enamels, urethanes, latex, some epoxies, and other single-component coatings. Made with soybeans, 600GL (SOY·Gel™) is a safe, low-odour, non-caustic, green coating remover.
 
As a leading innovator in green cleaning products,
Let's Clean introduced 600GL (SOY·Gel™) as a soy based paint remover, and changed the industry.
600GL (SOY·Gel™) is 100% biodegradable, practically odourless, and is safe for your hands, your work, and your customers.
 
•  SAFE! No methylene Chloride
•  Removes Multiple Layers with ONE Application
•  Made with 100% American Grown Soybeans
 
Coverage:
Coverage per m2 (square foot) varies depending on the type and age of coatings, number of layers and method of application.
Horizontal: Average coverage is 3.0 m2 per litre (125 sq. ft. per gallon) (up to 4.8 m2 per litre (200 sq. ft. per gallon))
Vertical: Average coverage is 1.8 m2 per litre (75 sq. ft. per gallon).
 
Application:
Due to variances in surfaces and conditions, test in a small, inconspicuous area before using on complete project.

Apply a thick layer of 600GL (SOY·Gel™) by pouring, brushing, squeegee, or commercial airless sprayer.
Applying too thin will cause 600GL (SOY·Gel™) to dry out before removal is complete.
Use a scraper (link) to check if the coating is softened down to the surface.
If not, wait longer and recheck. When the coating is completely softened, remove with a scraper - LiNBiDE Scrapers.
 
Clean Up:
Use Degreaser or water and a scrub brush, mop, or power washer to clean remaining thin residue.
Remove excess coating(s) and before using a power washer for final cleaning.
Tips for Pros: Use our Blue-Vac System for a quick wash off. 
Allow surface to dry before further preparations.
 
Usage Tips from the Pros:

For large application areas, use a professional airless sprayer or a 4 stage HVLP sprayer.
For tough coatings or numerous layers, use a notched 1/2" squeegee or 1/4" gauge rake. Square metre rate will be greatly reduced.
When used outdoors, cover with a thin polythene (3m Hand-Masker, clingfilm, plastic bag, bin liner, glad wrap etc.) to help keep 600GL wet and working. 
 
Precautions:
Concrete surfaces may darken with use of 600GL. Protect plants and vegetation with a plastic drop cloth. Always use care to prevent overspray from getting on surfaces other than the one being prepped or cleaned.
 
Warranties:
Let's Clean warrants only that the product delivered will be free from defects in workmanship and material at the time of purchase. Under no conditions or circumstances is Let's Clean liable for loss, damage, expenses or consequential damage resulting from use of this product.

Ideal for lead-based paint removal. The lead becomes encapsulated in the gel, preventing airborne particles and allowing for safe removal.  Dispose of in accordance with all existing local, state, and federal ordinances.
 
Note:
As an option use standard detergent instead of Franmar's "Emerge" as shown in the Video below.

Downloads:

Franmar Brochure 123 Brochure Download
Material Safety Data Sheet   MSDS Download
Technical Data Sheet   Technical Data

Product Tags

Other people marked this product with these tags:

Use spaces to separate tags. Use single quotes (') for phrases.

Video