• No Fumes
• No Solvents
• No Phenol
• No Methylene Chloride

Removes most paints from most surfaces
(especially lead paint)

Instructions:

1. Mix poultice thoroughly before use
2. Apply thick coat of stripper (approx. 3mm) onto surface to be stripped.
   Application methods: trowled on or sprayed on with hopper gun.
3. Leave for 30 minutes to an hour, test with scraper to determine if paint is sufficiently softened.
   Stripping time depends on number of paint layers, age and type. The product may be left on for 24 hours or even longer. Keep poultice moist. In dry conditions cover with gladwrap, plastic sheets.
4. Remove poultice with scraper and collect waste into bucket. Wash off residue with low to high pressure water or wash and scrub clean with medium to hard brush. Removal of multi layers of paint may need repeat application.
5. We recommend all lead based paints be removed by professionals who are properly trained in the methods. Disposal must be in accordance with State regulations.