Welcome to LET'S CLEAN Online Store - Sydney Paint Strippers!

My Cart:

0 item(s) - $0.00
You have no items in your shopping cart.

FAQ Blue Vac® System

Blue Vac® FAQ SectionBlue Vac FAQ Section

This is a short list of our most frequently asked questions. For more information or support about all our products send us an email at info @ letsclean.com.au or call us +61 (02) 9451 8422

General

Blue Vac® FAQ

General Questions

Where can I purchase the product?

Answer: Ether on this website or by email to order @ letsclean.com.au
You also can give us a call at +61 (02) 9451 8422 -- ˆ Top ˆ

Do I need a license for Lead Paint removal?

Answer: No, however, Let’s Clean Pty. Ltd. have extensive experience in lead-abatement procedures and are a Registered Lead-Safe Contractor with the Master Painters Association of Australia, holding certificates on Lead Paint Management from Macquarie University and Standards Australia. Legislation on the stripping of lead paint may differ from state to state in Australia. -- ˆ Top ˆ

Is it hard to estimate a paint stripping or cleaning Job?

Answer: It is difficult to ascertain the correct procedure to follow when paint stripping without first carrying test samples. What works on concrete, without causing any damage, may not necessarily be the right approach when stripping timber or brickwork. -- ˆ Top ˆ

What is the acronym VOC stand for?

Answer: Volatile Organic Compounds (VOCs) are organic chemicals that have a high vapor pressure at ordinary room temperature. Their high vapor pressure results from a low boiling point, which causes large numbers of molecules to evaporate or sublimate from the liquid or solid form of the compound and enter the surrounding air. For example, formaldehyde, which evaporates from paint, has a boiling point of only (minus) –19 °C (–2 °F). See Wikipedia -- ˆ Top ˆ

Where can I dispose lead paint scrapping?

Answer: Debris from lead-based paint removal or renovation may be double-bagged and disposed of in limited quantities in household trash. Lead debris must never be burned. Liquid wastes, including wash water, must never be dumped onto the ground; waste water should be filtered through a cloth filter before dumping into a sanitary sewer or toilet. The filtered debris can go out with the other trash. The mops and cloths used to clean up lead dust and debris should never be used for any other purpose, and should be disposed of when the job is done.We are advicing you to check with your local council before you dispose any lead based paint rubbish.

Been-e-doo® Questions

What is Blue Vac® System?

Answer: The Blue Vac® is a.

Wow much will 1 Ltr of Blue Vac&reg: cover?

Answer: The Blue Vac® will cover about 300 x 300mm area. -- ˆ Top ˆ

Will Blue Vac® remove all types of Mastic and Glue?

Answer: Blue Vac® has proven to remove most Mastic and Glue, especially Asbestos Glue. A test is recommended on a small area. Order a sample from us and try it out. See link here. -- ˆ Top ˆ

What application methods are used for Blue Vac®?

Answer: Following is recommended:

  • First mix poultice thoroughly before use.
  • Apply thick coat of poulice (approx. 3mm) onto surface to be stripped. Application methods are trowled on or spryed on with a hopper gun.
  • Leave for 30 minutes to an hour, test with scraper to determane if paint is sufficiently softened. Stripping time depends on number of paint layers, age and type. The product may be left on for 24 hours or even longer. Keep poultice moist. In try conditions cover with gladwrap, plastic sheets or simalar.
  • Remove poultice with scraper and collect wast into bucket. Wash off residue with low to high pressure water or wash and scrup clean with medium to hard brush. Recomended is the Blue Vac System - See link here. Removal of multi layers of paint may need repeat application.
  • We recommend all lead based paints be removed by professionals who are properly trained in the methods. Disposal must be in accordance with Australian State and iternational regulations. -- ˆ Top ˆ

What is the difference between Blue Vac® and SOY•Gel™?

Answer: The difference between Blue Vac® and SOY•Gel™ is that Blue Vac® will ... and SOY•Gel™ will .... -- ˆ Top ˆ